| • |
POWER SUPPLY
DL65/80-0x/1x/2x/3x/4x/5x: +5 Vdc +/-5%
DL65/80-6x: Directly from Terminal/PC or by using PG5 power supply if Terminal/PC is unable to provide the 95 mA needed
|
| • |
POWER CONSUMPTION (operating mode)
65 to 120 mA (depending on the model)
|
| • |
SENSOR
Linear CCD array, 2048 pixels
|
| • |
LIGHT SOURCE
Visible red LED (660 nm)
|
| • |
MAX. RESOLUTION
6 mils (0.15 mm)
|
| • |
SCAN RATE
60 scans/sec.
|
| • |
PRINT CONTRAST RATIO (min)
PCS = 20%
|
| • |
MAX. BAR CODE LENGTH
65 mm, 2.56 in (DL65); 82 mm, 3.23 in (DL80)
|
| • |
READING DISTANCE
0 to 30 mm, 0 to 1.2 in (DL65)
0 to 25 mm, 0 to 1 in (DL80)
|
| • |
DECODER
Built-in (except DL65/80- 00/01)
|
| • |
"GOOD READ" INDICATORS
LED and adjustable tone beeper
|
| • |
READING SAFETY
Time selection between one reading and another of the same code up to 9.9 sec.
|
| • |
READABLE BAR CODES
2/5 family, Code 39, Code 93, Code 128, Code 32, Code 39 CIP, EAN128, EAN/UPC, Codabar, Code 11, Plessey, MSI
|
| • |
READING MODE
Single code or auto-discrimination
|
| • |
PROGRAMMING METHOD
Manual: reading special programming bar codes
Automatic (DL65/80-10/11only): S/W commands via the RS232 port
Copy: master/slave configuration (using copy cables as listed in Accessories)
|
| • |
INTERFACES
TTL Laser, RS232, Wedge, Pen emulation, OCIA, OCR, IBM 4683/4
|
| • |
DIMENSIONS
165 x 79 x 60 mm / 6.5 x 3.11 x 2.36 in. (DL65);
170 x 94 x 70 mm / 6.69 x 3.7 x 2.75 in. (DL80)
|
| • |
WEIGHT (approx.)
160 g, 5.6 oz (DL65) 170 g, 6 oz (DL80)
|
| • |
CASE MATERIAL
ABS
|
| • |
CABLE LENGTH
1.5 m (4.92 ft)
|
| • |
AMBIENT LIGHT CONDITIONS
20,000 lux max. (on contact with code)
|
| • |
OPERATING TEMPERATURE
-10 to 45 °C (14 to 113 °F)
|
| • |
STORAGE TEMPERATURE
-20 to 70 °C (-4 to 158 °F)
|
| • |
HUMIDITY
90% non condensing
|
| • |
SHOCK RESISTANCE
IEC 68-2-27 Test EA
|
| • |
DROP RESISTANCE
IEC 68-2-32 Test ED
|
| • |
PROTECTION CLASS
IP30
|
