Datenblatt in deutsch
|
Contact
readers
|
| • |
65 and 88 mm reading window
|
| • |
Multistandard decoder/interface
|
| • |
Datalogic single chip IHHC (Intelligent Hand-Held Controller)
|
| • |
25 MHz microprocessor
|
| • |
Advanced decoding libraries with SFLS (Software Focus Level System)
|
| • |
High reading performance
|
| • |
User friendly set up
|
| • |
Ergonomic and lightweight design |
 |
| • |
Data Collection in commercial and office automation environments:
- EPOS
- Libraries
- Pharmacies
- Banks
- Insurance Companies
- Rental Companies
|
| • |
Data Collection in light industrial environments:
- Work-in-Progress
- Production Control
- Goods In/Out
- Stock Control
- File Allocation/Retrieval
- Quality Control
|
|
Datalogic’s new generation of CCD readers, DLC60XX-M, were created to fulfill the most common retail and office automation sector needs by offering excellent reading performance and reliability at a low price. DLC6065-M performs retail applications in which codes do not exceed 65 mm in length. Codes up to 90 mm can be read by DLC6090-M (available with trigger), which was designed to perform office automation applications where codes longer than 65 mm are often used.
The reading performance, thanks to excellent optics and the Software Focus Level System, is outstanding in terms of reliability on high and low density codes even of poor quality and applied on curved or uneven surfaces.
The 100 scans/sec scan rate is perfectly combined with a new powerful Datalogic decoding unit working at 25 MHz.
Reading aggressiveness is also enhanced by the readers’ depth of field, namely from contact up to 5 cm, that allows proximity image acquisition without any risk of misreading codes placed very close to each other.
One of the major features of the new Datalogic CCD series is represented by the multi-standard interface mounted on a board. Connection to RS232, Wedge and Pen Emulation can be obtained using just one unit, by simply changing the plug-in cables. The main benefits of these features are: stock savings, faster delivery, and, for the end user, long-term investment protection (the peripheral can adapt itself to possible changes in the system).
From a technological point of view, the new CCD reader shows unparalleled solutions. One of these is represented by the IHHC (Intelligent Hand-Held Controller), a single custom chip which integrates all the discrete components normally used in these devices. The innovative technology assures extreme reliability (by reducing the number of components, you statistically reduce the risk of failure), and, after having performed the ISO9000 burn procedure and tests, possible break downs due to the electronics circuitry are drastically reduced.
|
| Models |
| • |
DLC6065-M0; Hand-held CCD reader without trigger (65 mm reading window)
|
| • |
DLC6090-M1; Hand-held CCD reader with trigger (88 mm reading window) |
Accessories
|
| • |
CAB320; RS232 cable, 25-pin male connector (DTE configuration) |
| • |
CAB328; RS232 cable, 25-pin female connector cable (DCE
configuration)
|
| • |
CAB327; RS232 cable, 9-pin female connector (DCE
configuration)
|
| • |
CAB389
RS232/Beetle straight cable, 9-pin
male connector |
| • |
CAB321; IBM PS/2 minidin wedge cable
|
| • |
CAB322; IBM AT/XT din wedge cable
|
| • |
CAB324; IBM vdt. 31xx, 32xx, 37xx, din 240° wedge cable
|
| • |
CAB325; IBM vdt. 3151, 34xx, 8-pin phone connector wedge cable
|
| • |
CAB326; IBM vdt. 3153, 6-pin phone connector wedge cable
|
| • |
CAB323; Pen emulation, 9-pin male connector cable
|
| • |
ADP-102; 5P din T-pass adapter
|
| • |
ADP-103; 6P minidin T-pass adapter
|
| • |
Operator's Manual; Operator's manual for Hand Held Devices
|
| • |
SPC6065; Desk/Wall plastic holder for DLC6065-M0
|
| • |
PG5 (110 Vac); Power supply unit
|
| • |
PG5 (220 Vac); Power supply unit |
|
| • |
POWER SUPPLY
+5 Vdc ± 5%
Directly from the terminal or PC in wedge and pen mode, or through an external PG5 power supply in RS232 mode
|
| • |
CONSUMPTION
Typically 80 mA, 150 mA max.
|
| • |
LIGHT SOURCE
Visible red LED
|
| • |
MAX. RESOLUTION
0.1 mm (DLC6065-M); 0.13 mm (DLC6090-M)
|
| • |
SCAN RATE
100 scans/sec
|
| • |
PRINT CONTRAST RATIO
PCS = 15%
|
| • |
READING FIELD
65 mm (DLC6065-M); 88 mm (DLC6090-M)
|
| • |
READING DISTANCE
0 to 50 mm on EAN 13 code MAG1
|
| • |
DECODER
Integrated Multistandard
|
| • |
READING INDICATORS
LED and adjustable tone "beeper"
|
| • |
READING SAFETY
Time selection between each reading of the same code up to 9.9 sec
|
| • |
READABLE BAR CODES
2/5 family, EAN/UPC, Code 39 (plus Code 32 and CIP 39), CODABAR, Code 128, Code 93
|
| • |
READING MODE
Single or auto-discrimination code
|
| • |
PROGRAMMING METHOD
Manual: Reading special bar codes
Automatic (with RS232): S/W commands through the serial port
|
| • |
INTERFACES
RS232, Wedge (PC IBM AT/PS2, IBM terminals: 31xx, 32xx, 34xx, 37xx, 3153), Pen emulation
|
| • |
DIMENSIONS
164 x 77.5 x 63 mm (DLC6065-M); 175 x 100 x 80 mm (DLC6090-M)
|
| • |
WEIGHT (approx.)
160 g (DLC6065-M); 195 g (DLC6090-M)
|
| • |
CASE MATERIAL
ABS
|
| • |
CABLE LENGTH
2 m linear
|
| • |
AMBIENT LIGHT CONDITIONS
30,000 lux max. (contact with code surface)
|
| • |
OPERATING TEMPERATURE
0 to 55 °C
|
| • |
STORAGE TEMPERATURE
-20 to 70 °C
|
| • |
HUMIDITY
90% non condensing
|
| • |
DROP RESISTANCE
IEC 68-2-32 Test ED
|
| • |
PROTECTION CLASS
IP30
|
|
RS232 connection
 |
Wedge Connection
 |
Pen Emulation Connection
 |
|
