Datenblatt in deutsch
|
|
|
| • |
Rugged metal housing
|
| • |
Double illuminating diode
|
| • |
Single optic resolution
|
| • |
Red and Infrared versions
|
| • |
Security and laminated codereading
|
| • |
"Good Read" LED indicator and beeper
|
| • |
RS232 and Wedge decodedversions (DLS2000-M)
|
| • |
Plug-in cable set (DLS2000-M)
|
 |
| • |
Time & attendance terminals
|
| • |
WIP terminals
|
| • |
Access control: parking lots, laboratories, work areas, ski-lifts, etc.
|
| • |
Automatic payment and ticket acceptance in: sports areas, public transport, health services, etc.
|
|
DLS2000 is a family of bar code readers designed for data collection applications in both commercial and industrial environments.
The slot readers are available in both red and infrared versions with single resolution optics designed to read high and low density codes.
The double diode illumination method allows High First Read Rate on scratched and dirty bar codes and is capable of scanning multi-laminated cards.
The DLS2000 family is composed of digital and decoded models.
The digital models - DLS2000 - have pen output and can be connected to the compatible family of Datalogic decoders (Dataplus family and DLD1000) or to any external device that accepts pen input.
The decoded models - DLS2000-M - are available with RS232 or Wedge output, and can be connected to the host computer using the Datalogic DLC6065/90-M CCD reader plug-in cable set.
All the decoded versions are supplied with a quick reference bar code configuration manual. Should the default settings not match the particular application, the user can customize them through the serial channel or bar code strings.
The DLS2000 slot family can be installed on a flat working plane or attached to the wall according to specific application needs.
|
| Models |
| • |
DLS2031R-20
Red light source, without connector, pen output
|
| • |
DLS2032I-20
Infrared light source, with connector, pen output
|
| • |
DLS2031I-20
Infrared light source, without connector, pen output
|
| • |
DLS2032R-20
Red light source, with connector, pen output
|
| • |
DLS2032R-M0
Red light source, with connector, multi-interface
(RS232/Wedge)
|
| • |
DLS2032I-M0
Infrared light source, with connector, multi-interface
(RS232/Wedge) |
Accessories for decoded versions (DLS2000-M)
|
| • |
CAB320
RS232 cable, 25-pin male connector (DTE
configuration)
|
| • |
CAB328
RS232 cable, 25-pin female connector cable (DCE
configuration)
|
| • |
CAB327
RS232 cable, 9-pin female connector (DCE
configuration)
|
| • |
CAB389
RS232/Beetle straight cable, 9-pin male
connector |
| • |
CAB321
IBM PS/2 minidin wedge cable
|
| • |
CAB322
IBM AT/XT din wedge cable
|
| • |
CAB324
IBM vdt. 31xx, 32xx, 37xx, din 240° wedge cable
|
| • |
CAB325
IBM vdt. 3151, 34xx, 8-pin phone connector wedge cable
|
| • |
CAB326
IBM vdt. 3153, 6-pin phone connector wedge cable
|
| • |
ADP-102
5P din T-pass adapter
|
| • |
ADP-103
6P minidin T-pass adapter
|
| • |
PG5 (110
Vac)
Power supply unit
|
| • |
PG5 (220
Vac)
Power supply unit |
|
| • |
POWER SUPPLY
5 Vdc ± 10%
|
| • |
POWER CONSUMPTION
35 mA max. (DLS2000)
140 mA max. @ 5 Vdc (DLS2000-M)
|
| • |
DEPTH OF FIELD
3 mm
|
| • |
SCAN RATE
0.1 to 2 m/sec
|
| • |
PRINT CONTRAST RATIO
15% red version; 30% infrared version
|
| • |
DIGITAL OUTPUT
NPN transistor with internal 2.7 KW pull-up resistance; white = 0V, black = 5V
|
| • |
READING INDICATORS
Led, beeper
|
| • |
INTERFACES
RS232, Wedge (PC IBM AT/PS2, IBM terminals: (DLS2000-M only) 31xx, 34xx, 37xx, 3153)
|
| • |
READABLE BAR CODES
2/5 family, EAN/UPC, Code 39 (plus Code 32 (DLS2000-M only) and CIP 39), Codabar, Code 128, Code 93
|
| • |
READING MODE
Single or autodiscrimination code (DLS2000-M only)
|
| • |
PROGRAMMING METHOD (DLS2000-M only)
Manual: Reading special bar codes
Automatic (with RS232): S/W commands through the serial port
|
| • |
WEIGHT
About 180 g without cable
|
| • |
CASE MATERIAL
Cast aluminium
|
| • |
CABLE LENGTH
2 m (6.6 ft) DLS2000
60 cm (23.6 in) DLS2000-M
|
| • |
AMBIENT LIGHT CONDITIONS
10,000 lux (light angle 80°)
|
| • |
OPERATING TEMPERATURE
0 to 55 °C (32 to 131 °F)
|
| • |
STORAGE TEMPERATURE
-20 to 60 °C (-4 to 140 °F)
|
| • |
HUMIDITY
90% non condensing
|
| • |
VIBRATION RESISTANCE
0.75 mm at 10 to 55 Hz, 2 hours sinewave, sweeptime 1 octave/min. x,y,z
|
| • |
SHOCK RESISTANCE
30 G - 11 ms 3 shocks on the 6 planes half sine
|
| • |
PROTECTION CLASS
IP50
|
|
